Command Output Pagination; Transposing Mistyped Characters; Controlling Capitalization - Brocade Communications Systems RFS4000 Cli Reference Manual

Command output pagination

Output often extends beyond the visible screen length. For cases where output continues beyond
the screen, the output is paused and a
at the bottom of the screen. To resume the output, press the Return key to scroll down one line or
press the Spacebar to display the next full screen of output.

Transposing mistyped characters

If you have mistyped a command entry, you can transpose the mistyped characters. To transpose
characters, use the following key combination:
Keystrokes
Ctrl-T

Controlling Capitalization

Capitalize or lowercase words with a few simple key sequences. The controller CLI commands are
generally case-insensitive (and in lowercase). To change the capitalization of the commands, use
one of the following sequences:
Keystrokes
Esc, C
Esc, L
Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
53-1001931-01
Press Any Key to Continue (Q to Quit)
Purpose
Transposes the character to the left of the cursor with the character located at
the cursor
Purpose
Capitalizes the letters to the right of cursor
Changes the letters at the right of cursor to lowercase
Using the no and default command forms
1
prompt displays
29