Standard Acl Instance; In This Chapter; Standard Acl Config Commands - Brocade Communications Systems RFS4000 Cli Reference Manual

Standard ACL Instance

In this chapter

The Standard ACL instance
List entries associated with the controller.
To navigate to this instance, use the command:

Standard ACL config commands

Table 15
TABLE 15
Command
clrscr
deny
end
exit
help
mark
no
permit
service
show
Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
53-1001931-01
•
Standard ACL config commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 471
•
Use case: configuring IP standard ACL . . . . . . . . . . . . . . . . . . . . . . . . . . . . 485
(config-std-acl)
RFController(config)#ip access-list standard [<ACL-name>|
<1-99>|<1300-1999>]
RFController(config-std-acl)#
summarizes the
config-std-nacl
Standard ACL Config Command Summary
Description
Clears the display screen
Specifies packets to reject
Ends the current mode and moves to the EXEC mode
Ends the current mode and moves to the previous mode
Displays the interactive help system
Specifies packets to mark
Negates a command or sets its defaults
Specifies packets to forward
Invokes service commands to troubleshoot or debug
(config-if)
Displays running system information
is used to manage the standard Access Control
commands:
instance configurations
Chapter
15
Ref.
page 472
page 473
page 475
page 476
page 477
page 478
page 480
page 481
page 483
page 484
471