Dhcp-Sniff-State - Brocade Communications Systems RFS4000 Cli Reference Manual

20
Wireless configuration commands

dhcp-sniff-state

Wireless configuration commands
Records wireless client DHCP state information
Supported in the following platforms:
•
•
•
Syntax
Parameters
enable
Use the
state information.
Example
624
Mobility RFS4000 Controller
Mobility RFS6000 Controller
Mobility RFS7000 Controller
dhcp-sniff-state enable
Allows support for recording DHCP state information for wireless
clients
{no} dhcp-sniff-state enable
RFController(config-wireless)#dhcp-sniff-state enable
RFController(config-wireless)#
command to disable recording wireless client DHCP
Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
53-1001931-01