Cluster-Cli - Brocade Communications Systems RFS4000 Cli Reference Manual

4
Priv Exec command

cluster-cli

Priv Exec command
Use this command to access the cluster-cli context. The cluster-cli context provides centralized
management to configure all members of cluster from one member. Any command executed under
this context is executed on all controllers in the cluster.
A new context (redundancy) is available to support the cluster-cli. Any commands executed under
this context are executed on each cluster member.
Use
Supported in the following platforms:
•
•
•
Syntax
Parameters
enable
Example
180
to exit the cluster-cli context.
no cluster-cli
Mobility RFS4000 Controller
Mobility RFS6000 Controller
Mobility RFS7000 Controller
cluster-cli enable
Enables the controller cluster context
RFController#cluster-cli enable
Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
53-1001931-01