Alarm-Log - Brocade Communications Systems RFS4000 Cli Reference Manual

2
show

alarm-log

Privilege / Global Config
Displays the contents of the alarm log on the device
Supported in the following platforms:
•
•
•
Syntax
Parameters
128
Mobility RFS4000 Controller
Mobility RFS6000 Controller
Mobility RFS7000 Controller
show alarm-log {<1-65535>|acknowledged|all|count|new|
severity-to-limit}
show alarm-log severity-to-limit {critical|
informational|major|normal|warning}
alarm-log [<1-65535>|
acknowledged|all|count|ne
w| severity-to-limit]
Displays the contents of the alarm log on the device.
•
<1-65535> Displays the details of a specific alarm ID
-
•
acknowledged Displays information for acknowledged
-
alarms currently in the system
•
all Displays all the alarms currently in the system
-
•
count Displays the number (count) of the alarms currently
-
in the system
•
new Displays those new alarms currently in the system
-
•
severity-to-limit {critical|informational
major|normal|warning}
specified severity, as well as those alarms with a severity
higher than the specified value.
•
critical Displays all critical alarms
-
•
informational Displays all informational or higher
-
severity alarms
•
major Displays all major or higher severity alarms
-
•
normal Displays all normal or higher severity alarms
-
•
warning - Displays all warning or higher severity alarms
Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
Displays the alarms having
-
53-1001931-01