Brocade Communications Systems RFS4000 Cli Reference Manual page 77

Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
53-1001931-01
HTTP server: Running
Config status: Enabled
RFController#show ip http secure-server
HTTP secure server: Running
Config status: Enabled
Trustpoint: default-trustpoint
RFController#show ip interface brief
Interface IP-Address/Mask
me1 10.1.1.100/24
vlan1 192.168.1.1/24
vlan11 192.168.11.1/24
vlan2 64.171.249.249/24
wan 166.129.246.245/32 up
RFController#
RFController#show ip interface vlan 1 brief
Interface IP-Address
vlan1 157.235.208.233
RFController#show ip name-server
157.235.3.195 dynamic
157.235.3.196 dynamic
RFController#show ip routing
IP routing is on
RFController(config)#show ip route detail
Codes: K - kernel/icmp, C - connected, S - static, D - DHCP
> - Active route, - Next-hop in FIB, p - stale info
S 1.1.0.0/16 [1/0] via 1.1.1.1 inactive
S 1.1.1.0/24 [1/0] via 1.1.1.2 inactive
S 10.0.0.0/8 [1/0] via 10.10.10.10 inactive
S 157.235.208.0/24 [1/0] via 157.235.208.246 inactive
RFController#show ip ssh
SSH server: enabled
Status: running
Keypair name: default_ssh_rsa_key
Port: 22
RFController#show ip telnet
Telnet server: enabled
Status: running
Port: 23
Status Protocol
up down
up up
up up
up up
up
Status Protocol
(DHCP)up up
2
show
75