Extensive-Scan - Brocade Communications Systems RFS4000 Cli Reference Manual

25
smart-rf config commands

extensive-scan

smart-rf config commands
Enters the extensive scan mode
The device needs calibration at every
Supported in the following platforms:
•
•
•
Syntax
Parameters
extensive enable
Example
774
Mobility RFS4000 Controller
Mobility RFS6000 Controller
Mobility RFS7000 Controller
extensive-scan enable
Enables the extensive scan mode.
RFController(config-wireless-smart-rf)#extensive-scan enable
RFController(config-wireless-smart-rf)#
level.
tx-power
Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
53-1001931-01