Brocade Communications Systems RFS4000 Cli Reference Manual page 444

13
mst config commands
no
mst config commands
Negates a command or sets its defaults
Supported in the following platforms:
•
•
•
Syntax
Parameters
instance
name
revision
Usage Guidelines
The
parameters associated with the command getting negated.
Example
442
Mobility RFS4000 Controller
Mobility RFS6000 Controller
Mobility RFS7000 Controller
no [instance|name|revision]
Sets the MST Instance
•
•
Assigns a name to the MST region
Defines the revision number for configuration information
command negates any command associated with it. Wherever required, use the same
no
RFController(config-mst)#no instance 10 vlan 20
RFController(config-mst)#
RFController(config-mst)#no name MyRegion
RFController(config-mst)#
RFController(config-mst)#no revision
RFController(config-mst)#
vlan – Delete the association of vlan with this instance
<vlan-id> – List of vlan IDs
Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
53-1001931-01