Show - Brocade Communications Systems RFS4000 Cli Reference Manual

17
DHCP Config commands

show

DHCP Config commands
Displays current system information
Supported in the following platforms:
•
•
•
NOTE
The following commands display only for the Mobility RFS6000 Controller and the Mobility RFS4000
Controller:
- power
The following commands display only for the Mobility RFS7000 Controller and the Mobility RFS4000
Controller:
- port-channel
- static-channel-group
Syntax
Parameters
?
Example
534
Mobility RFS4000 Controller
Mobility RFS6000 Controller
Mobility RFS7000 Controller
show <paramater>
RFController(config-dhcp)#show ?
access-list
aclstats
alarm-log
autoinstall
banner
boot
clock
commands
crypto
debugging
dhcp
environment
file
firewall
ftp
history
interfaces
ip
ldap
licenses
logging
mac
mac-address-table
mac-name
management
Displays parameters for which information can be
viewed using the show command
Internet Protocol (IP)
Show ACL Statistics information
Display all alarms currently in the system
autoinstall configuration
Display Message of the Day Login banner
Display boot configuration.
Display system clock
Show command lists
encryption module
Debugging information outputs
DHCP Server Configuration
show environmental information
Display filesystem information
Wireless firewall
Display FTP Server configuration
Display the session command history
Interface status
Internet Protocol (IP)
LDAP server
Show any installed licenses
Show logging configuration and buffer
Internet Protocol (IP)
Display MAC address table
Displays the configured mac names
Display L3 Managment Interface name
Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
53-1001931-01