Controller - Brocade Communications Systems RFS4000 Cli Reference Manual

controller

RTLS config commands
Configures the controller's geographical location parameters
Supported in the following platforms:
•
•
•
Syntax
Parameters
coordinates x <0-65535> y
<0-65535> z <0-65535>
longitude <-180.00-80.00>
latitude
<-90.00 - 90.00>
Example
Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
53-1001931-01
Mobility RFS4000 Controller
Mobility RFS6000 Controller
Mobility RFS7000 Controller
controller [coordinates|geo-coordinates]
controller coordinates x <0-65535> y <0-65535> z <0-65535>
controller geo-coordinates longitude <-180.00-80.00>
latitude <-90.00 - 90.00>
Configures controller coordinates within the site
•
•
•
Configures controller geographic coordinates
•
•
RFController(config-rtls)#controller coordinates x 121 y 121 z 135
RFController(config-rtls)#
RFController(config-rtls)#controller geo-coordinates longitude 120 latitude 70
RFController(config-rtls)#
x <0-65535> – Configures X coordinate
y <0-65535> – Configures Y coordinate
z <0-65535> – Configures Z coordinate
longitude <-180.00-180.00> – Configures longitude in
degrees
latitude <-90.00-90.00> – Configures latitude in degrees
RTLS config commands
21
725