Privileged Exec Commands; In This Chapter; Priv Exec Command - Brocade Communications Systems RFS4000 Cli Reference Manual

Privileged Exec Commands

In this chapter

Most PRIV EXEC commands set operating parameters. Privileged-level access should be password
protected to prevent unauthorized use. The PRIV EXEC command set includes commands
contained within the USER EXEC mode. The PRIV EXEC mode also provides access to configuration
modes, and includes advanced testing commands.
The PRIV EXEC mode prompt consists of the host name of the device followed by a pound sign (#).
To access the PRIV EXEC mode, enter the following at the prompt:
The PRIV EXEC mode is often referred to as the enable mode, because the
used to enter the mode. There is no provision to configure a password to get access to PRIV EXEC
(enable) mode.

Priv Exec command

Table 4
TABLE 4
Command
acknowledge
archive
cd
change-passwd
clear
clock
clrscr
cluster-cli
configure
copy
debug
delete
diff
dir
disable
Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
53-1001931-01
•
Priv Exec command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 169
RFController>enable
RFController#
summarizes the controller PRIV EXEC commands:.
Priv Exec Commands
Description
Acknowledges alarms
Manages archive files
Changes the current directory
Changes the password of the logged user
Resets controller functions to last saved configuration
Configures the software system clock
Clears the display screen
Displays the cluster context
Enters the configuration mode
Copies content from one file to another
Displays debugging functions
Deletes a specified file from the system
Displays differences between two files
Lists the files on a filesystem
Turns off privileged mode command
Chapter
4
command is
enable
Ref.
page 171
page 172
page 174
page 175
page 176
page 179
page 32
page 180
page 181
page 182
page 183
page 188
page 189
page 190
page 191
169