Firewall - Brocade Communications Systems RFS4000 Cli Reference Manual

5
Global Configuration commands

firewall

Global Configuration commands
Use this command to set system's network-element-ID
Supported in the following platforms:
•
•
•
Syntax
316
Mobility RFS4000 Controller
Mobility RFS6000 Controller
Mobility RFS7000 Controller
firewall
[802.2-encapsulation|dhcp-snoop-conflict-detection|dhcp-snoop-conflict-loggin
g|clamp|enable|flow|virtual-defrag|vlan-stacking]
firewall enable
firewall 802.2-encapsulation permit
firewall clamp [path-mtu|tcp-mss]
firewall flow timeout [icmp|other|tcp|udp]
firewall flow timeout [icmp|other|udp] <10-32400>
firewall flow timeout tcp [close-wait|established|reset|
setup] <10-32400>
firewall virtual-defrag [enable|max-defrag-per-host|
max-frags-per-dgram|min-1st-frag-length]
firewall virtual-defrag enable
firewall virtual-defrag max-defrag-per-host <1-32>
firewall virtual-defrag max-frags-per-dgram <2-8129>
firewall virtual-defrag min-1st-frg-length <8-1500>
firewall vlan-stacking permit
Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
53-1001931-01