19
Radius configuration commands
ldap-server
Radius configuration commands
Sets the LDAP server configuration
It uses the existing external database (active directory with the onboard RADIUS server) instead of
the local database on the controller.
Supported in the following platforms:
•
•
•
Syntax
574
Mobility RFS4000 Controller
Mobility RFS6000 Controller
Mobility RFS7000 Controller
ldap-server [primary|secondary] host <IP>
ldap-server primary host <IP> port <1-65535>
login <user-name> bind-dn <distinguished-name> base-dn
<distinguished-name> passwd {<password>|<password>
|<password>} passwd-attr <password-attribute>
group-attr <group-attribute> group-filter
<group-filter> group-membership <group> net-timeout <1-10>
ldap-server secondary host <IP> port <1-65535> login <user-name> bind-dn
<distinguished-name> base-dn <distinguished-name> passwd
{<password>|<password>|
<password>} passwd-attr <password-attribute>
group-attr <group-attribute> group-filter <group-filter> group-membership
<group> net-timeout <1-10>
Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
53-1001931-01