adopt-unconf-radio
Wireless configuration commands
Adopts a radio (even if not yet configured). Default templates are used for configuring the adopted
radio
Supported in the following platforms:
•
•
•
Syntax
Parameters
None
Usage Guidelines
Use the {
Example
Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
53-1001931-01
Mobility RFS4000 Controller
Mobility RFS6000 Controller
Mobility RFS7000 Controller
adopt-unconf-radio enable
no} adopt-unconf-radio
RFController(config-wireless)#adopt-unconf-radio enable
RFController(config-wireless)#
Wireless configuration commands
command to switch off adopting unconfigured radios.
20
595