Brocade Communications Systems RFS4000 Cli Reference Manual page 406

12
Interface config commands
TABLE 12
Command
no
port-channel
power
service
show
shutdown
spanning-tree
speed
static-channel-g
roup
storm-control
controllerport
tunneling
404
Interface Config Commands
Description
Negates a command or sets its defaults
Configures the load-balancing criteria of an aggregated port
PoE (Power Over Ethernet) commands used to configure PoE
power limit and priority for a port
Invokes service commands to troubleshoot or debug the
instance configurations
(config-if)
Displays running system information
Shuts down a selected interface
Disables the selected interface. The interface is
administratively enabled unless explicitly disabled using this
command
Specifies the speed of a fast-ethernet (10/100) or a gigabit
ethernet port (10/100/1000)
Configures static channel commands
Sets broadcast rate-limit value
Sets controller mode characteristics
Sets protocol-over protocol tunneling
Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
Ref.
page 417
page 418
page 420
page 421
page 422
page 424
page 425
page 428
page 429
page 432
page 430
page 433
53-1001931-01