acknowledge
Priv Exec command
Acknowledges alarms
Supported in the following platforms:
•
•
•
Syntax
Parameters
alarm-log [<1-65535>|all]
Example
Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
53-1001931-01
Mobility RFS4000 Controller
Mobility RFS6000 Controller
Mobility RFS7000 Controller
acknowledge alarm-log [<1-65535>|all]
Acknowledges alarms
•
•
RFController#acknowledge alarm-log all
No corresponding record found in the Alarm Log.
RFController#acknowledge alarm-log 200
No corresponding record found in the Alarm Log.
RFController#
<1-65535> – Acknowledges the specific alarm ID
all – Acknowledges all alarms
Priv Exec command
4
171