Aap Ip Filtering; In This Chapter; Aap Ip Filter Config Commands - Brocade Communications Systems RFS4000 Cli Reference Manual

AAP IP Filtering

In this chapter

The AAP IP Filter list mechanism (config-aap-ipfilter) creates filters based on the request received
from the controller. It then applies those filters to the specified WLAN/LAN. To navigate to this
instance, use the command:

AAP IP Filter config commands

Table 29
TABLE 29
Command
clear-all-rules
clrscr
deny
end
exit
help
no
permit
service
show
Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
53-1001931-01
•
AAP IP Filter config commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 819
RFController(config)#aap-ipfilter-list <filtername>
RFController(config-aap-ipfilter)#
summarizes the controller
AAP IP Filter Configuration Commands
Description
Clears all the configured rules
Clears the display screen
Specifies the packet to reject
Ends the current mode
Ends the current mode and moves to the previous mode
Displays the interactive help system
Negates a command or sets its defaults
Specifies packets to forward
Invokes the service commands to troubleshoot or debug
instance configurations
Displays running system information
commands
config-aap-ipfilter
Chapter
27
Ref.
page 820
page 821
page 822
page 825
page 826
page 827
page 828
page 829
page 832
page 834
819