Exit - Brocade Communications Systems RFS4000 Cli Reference Manual

exit

RFID config commands
Ends the current mode and moves to the previous mode (GLOBAL-CONFIG). The prompt
changes to
Supported in the following platforms:
•
•
•
Syntax
Parameters
None
Example
Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
53-1001931-01
RFController(config)#
Mobility RFS4000 Controller
Mobility RFS6000 Controller
Mobility RFS7000 Controller
exit
RFController(config-rtls-rfid)#exit
RFController(config-rtls)#
RFID config commands
23
743