Ratelimit - Brocade Communications Systems RFS4000 Cli Reference Manual

ratelimit

Global Configuration commands
Configures rate limit parameters
Supported in the following platforms:
•
•
•
Syntax
Parameters
ratelimit
[arp|bcast|mcast|ucast]
[<0-7>|alerts|critical|
debugging|emergencies|
errors|informational|
notifications|warnings]
Example
Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
53-1001931-01
Mobility RFS4000 Controller
Mobility RFS6000 Controller
Mobility RFS7000 Controller
ratelimit [arp|bcast|mcast|ucast] [<0-7>|alerts|critical|
debugging|emergencies|errors|informational|notifications|
warnings]
Sets the logging levels for ratelimit feature.
•
RFController(config)# ratelimit arp log 0
RFController(config)# ratelimit arp log emergencies
Global Configuration commands
[arp|bcast|mcast|ucast] – Sets the protocol
•
<0-7> – Log severity level
•
alerts – immediate action needed
•
critical –Critical conditions
•
debugging – Debugging messages
•
emergencies – System is unusable
•
errors – Error conditions
•
informational – Informational messages
•
notifications – Normal but significant conditions
•
warnings – Warning conditions
5
275