Configuring Mac Extended Acl - Brocade Communications Systems RFS4000 Cli Reference Manual

Configuring MAC Extended ACL

MAC Extended ACLs contain rules based on the following parameters:
•
•
•
•
•
Source and Destination MAC address are mandatory parameters.
Execute the following commands to configure a MAC extended ACL with different rule parameters
on the controller:
Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
53-1001931-01
licenses
logging
mac
mac-address-table
mac-name
management
mobility
ntp
password-encryption
port-channel
protocol-list
privilege
radius
redundancy
rtls
role
running-config
securitymgr
service-list
sessions
mtp-notofication
snmp
snmp-server
spanning-tree
startup-config
static-channel-group
terminal
traffic-shape
timezone
upgrade-status
users
version
virtual-ip
wireless
wlan-acl
RFController(config-ext-macl)#show
Source MAC address
Destination MAC address
Ethertype– accepts well known types like IP, ARP, VLAN or an integer value between 1-65535.
VLAN-ID
VLAN 802.1p user priority
Configuring MAC Extended ACL
Show any installed licenses
Show logging configuration and buffer
Internet Protocol (IP)
Display MAC address table
Displays the configured MAC names
Display L3 Managment Interface name
Display Mobility parameters
Network time protocol
password encryption
Portchannel commands
List of protocols
Show current privilege level
RADIUS configuration commands
Display redundancy group parameters
Real Time Locating System commands
Configure role parameters
Current Operating configuration
Securitymgr parameters
List of services
Display current active open connections
Display SNMP engine parameters
Display SNMP engine parameters
Display SNMP engine parameters
Display spanning tree information
Contents of startup configuration
static channel group membership
Display terminal configuration parameters
Display traffic shaping
Display timezone
Display last image upgrade status
Display information about currently logged in users
Display software & hardware version
IP redundancy feature
Wireless configuration commands
wlan based acl
16
505