Brocade Communications Systems RFS4000 Cli Reference Manual page 246

5
Global Configuration commands
RFController(config)#crypto isakmp policy 100
RFController(config-crypto-isakmp)#encryption aes
RFController(config-crypto-isakmp)#hash sha
RFController(config-crypto-isakmp)#authentication pre-share
RFController(config-crypto-isakmp)#group 5
RFController(config-crypto-isakmp)#lifetime 9496
d. Create and configure IPSec an transform set.
RFController(config)#crypto ipsec transform-set TFSET ah-sha-hmac esp-aes
esp-sha-hmac
RFController(config-crypto-ipsec)#mode tunnel
e. Create and configure a crypto map.
RFController(config)#crypto map THIRDMAP 435 isakmp
RFController(config-crypto-map)#set peer 11.1.1.10
RFController(config-crypto-map)#match address 150
RFController(config-crypto-map)#set transformset TFSET
RFController(config-crypto-map)#set security-association lifetime seconds 3600
f. Associate the crypto map with a VLAN interface.
RFController(config)#interface vlan1
RFController(config-if)#ip address 15.1.1.20/24
RFController(config-if)#crypto map THIRDMAP
RFController(config-if)#interface vlan2100
RFController(config-if)#ip address 13.1.1.20/24
RFController(config-if)#ip route 0.0.0.0/0 15.1.1.2
244 Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
53-1001931-01