Saving The Current Fcoe Configuration; Creating An Fcoe Login Group - Brocade Communications Systems Converged Enhanced Ethernet 8000 Administrator's Manual

4

Creating an FCoE login group

Saving the current FCoE configuration

Perform the following task to save the current FCoE configuration.
Task
Save the current FCoE login configuration as the
effective configuration fabric-wide.
Creating an FCoE login group
The FCoE login group enables you to configure login policies.
Perform the following task to create an FCoE login group.
Task
Syntax is as follows:
•
•
•
•
•
•
28
DRAFT: BROCADE CONFIDENTIAL
--create—Create a login group.
lgname—Specify the name of the login group
for this switch. The maximum length is a
64-byte string.
-switch swwn—Specify the WWN of the
switch for which the login group is being
created.
-self—Specify the WWN of the current switch.
-allowall—Allow all VN_port devices to log in
to the switch.
member—Identify the WWN of the VN_port.
The WWN must be specified in hex as
xx:xx:xx:xx:xx:xx:xx:xx. Only specified
members are allowed to log in to the switch.
Command
switch:admin> fcoelogincfg --save
Command
switch:admin> fcoelogingroup --create lgname -switch
swwn | -self [-allowall | "member; member;..."]
Converged Enhanced Ethernet Administrator's Guide
53-1002163-02