Brocade Communications Systems RFS4000 Cli Reference Manual page 273

server
trusted-key <1-65534>
Example
Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
53-1001931-01
•
•
Configures the NTP server.
•
•
•
•
•
Key numbers for trusted time sources.
•
RFController(config)#ntp peer ?
WORD Name/IP address of peer
RFController(config)#ntp peer TestPeer ?
autokey Configure autokey peer authentication scheme
key Configure peer authentication key
prefer Prefer this peer when possible
version Configure NTP version
<cr>
RFController(config)#ntp peer TestPeer autokey ?
prefer Prefer this peer when possible
version Configure NTP version
<cr>
RFController(config)#ntp peer TestPeer autokey prefer ?
version Configure NTP version
<cr>
RFController(config)#ntp peer TestPeer autokey prefer version ?
<1-4> NTP version number
RFController(config)#ntp peer TestPeer autokey prefer version 3
RFController(config)#
RFController(config)#ntp peer TestPeer key ?
<1-65534> Peer key number
RFController(config)#ntp peer TestPeer key 20 ?
prefer Prefer this peer when possible
version Configure NTP version
<cr>
Global Configuration commands
prefer {version <1-4>} – Sets the preference for autokey.
Optionally set the NTP version to use
version <1-4> {prefer} – Sets the NTP version to use.
Optionally set this peer as preferred peer
<peer-name-or-IP> – Sets the IP address or name of the peer
autokey {[prefer {version <1-4>}|version <1-4> {prefer}]} –
Configures an autokey peer authentication scheme
•
prefer – Optional. Prefers this peer when possible
•
version <1-4> – Configures the NTP version
key <1-65534> {[prefer {version <1-4>}|version <1-4>
{prefer}]} – Configures the autokey peer authentication key
•
key <1-65535> – Sets the peer authentication key
number
prefer {version <1-4>} – Sets the preference for autokey.
Optionally set the NTP version to use
version <1-4> {prefer} – Sets the NTP version. Optionally set
this peer as preferred peer
<1-65534> – Defines the Key number
5
271