Brocade Communications Systems RFS4000 Cli Reference Manual page 86

2
show
ntp
Common to all modes
Displays NTP protocol information
Supported in the following platforms:
•
•
•
Syntax
Parameters
Example
84
Mobility RFS4000 Controller
Mobility RFS6000 Controller
Mobility RFS7000 Controller
show ntp [association|status]
ntp [association
detail|status]
RFController>show ntp associations
address ref clock
* master (synced), # master (unsynced), + selected, - candidate, ~ configured
RFController>
RFController>show ntp status
Clock is synchronized, stratum 0, actual frequency is 0.0000 Hz, precision is
2**0
reference time is 00000000.00000000 (Feb 07 06:28:16 UTC 2036)
clock offset is 0.000 msec, root delay is 0.000 msec
root dispersion is 0.000 msec,
RFController>
RFController(config)#show ntp associations detail
157.235.208.105 configured, sane, valid, leap_sub, stratum 16
ref ID INIT, time 00000000.00000000 (Feb 07 06:28:16 UTC 2036)
our mode client, peer mode unspec, our poll intvl 6, peer poll intvl 10
root delay 0.00 msec, root disp 0.00, reach 000,
delay 0.00 msec, offset 0.0000 msec, dispersion 0.00
precision 2**-20,
org time 00000000.00000000 (Feb 07 06:28:16 UTC 2036)
rcv time 00000000.00000000 (Feb 07 06:28:16 UTC 2036)
xmt time c8b42a7e.6eb04252 (Sep 14 19:22:38 UTC 2010)
filtdelay = 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00
RFController>show ntp status
Clock is synchronized, stratum 0, actual frequency is 0.0000 Hz, precision is
2^0
reference time is 00000000.00000000 (Feb 07 06:28:16 UTC 2036)
clock offset is 0.000 msec, root delay is 0.000 msec
root dispersion is 0.000 msec,
RFController>
Displays the Network Time Protocol (NTP) configuration
•
association detail – Displays existing NTP associations
•
detail – Displays NTP association details
•
status – Displays NTP status
st when poll reach delay offset
Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
disp
53-1001931-01