25
smart-rf config commands
select-channels
smart-rf config commands
Selects a list of channels for Automatic Channel Scan and Smart RF
Use this command to add channels or remove them from the channel list.
Supported in the following platforms:
•
•
•
Syntax
Parameters
<WORD>
add <WORD>)
remove <WORD>
Example
790
Mobility RFS4000 Controller
Mobility RFS6000 Controller
Mobility RFS7000 Controller
select-channel [<WORD>|add<WORD>|remove <WORD>]
A comma separated list of channel numbers.
Add a channel or a list of channels to the channel list.
Remove a channel or a list of channels from the channel list
RFController(config-wireless-smart-rf)#select-channels 1,2,15-17
RFController(config-wireless-smart-rf)#select-channels add 1,2,15-17
RFController(config-wireless-smart-rf)#select-channels remove 1,2,15-17
RFController(config-wireless-smart-rf)#
Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
53-1001931-01