Brocade Communications Systems RFS4000 Cli Reference Manual page 417

mac
Interface config commands
Applies a MAC access list (ACL) to Gigabit Ethernet interface
NOTE
The access list cannot be applied on a management interface (me1).
Supported in the following platforms:
•
•
•
Syntax
Parameters
access-group <acl-name>
Example
Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
53-1001931-01
Mobility RFS4000 Controller
Mobility RFS6000 Controller
Mobility RFS7000 Controller
mac access-group <acl-name> in
Sets the MAC access groups ACL
•
•
RFController(config-if)#mac access-group Ark200 in
RFController(config-if)#
<acl-name> – Sets ACL name
in – Applies the ACL to ingress packets
Interface config commands
12
415