nas-id
Wireless configuration commands
Configures the NAS ID to be sent to the RADIUS server
Supported in the following platforms:
•
•
•
Syntax
To override nas-id on a per WLAN basis:
Parameters
<nas-id>
Example
Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
53-1001931-01
Mobility RFS4000 Controller
Mobility RFS6000 Controller
Mobility RFS7000 Controller
nas-id <nas-id>
wlan <1-4098> nas-id <nas-id>
A character string to be used as the NAS ID. Can be up to 256
characters long.
RFController(config-wireless)#nas-id WIRELESSWELL
RFController(config-wireless)#
RFController(config-wireless)#wlan 1 nas-id WIRELESSWELL1
Wireless configuration commands
20
639