Brocade Communications Systems RFS4000 Cli Reference Manual page 419

no
Interface config commands
Negates a command or sets its defaults
Supported in the following platforms:
•
•
•
NOTE
The following commands display only for the Mobility RFS6000 Controller and the Mobility RFS4000
Controller:
- power
The following commands display only for the Mobility RFS7000 Controller and the Mobility RFS4000
Controller:
- port-channel
- static-channel-group
Syntax
Parameters
The
parameters associated with the command getting negated.
Example
Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
53-1001931-01
Mobility RFS4000 Controller
Mobility RFS6000 Controller
Mobility RFS7000 Controller
no [crypto|description|duplex|ip|mac|port-channel|
shutdown|spanning-tree|speed|static-channel-group|
storm-control|controllerport]
command negates any command associated with it. Wherever required, use the same
no
RFController(config-if)#no duplex
RFController(config-if)#
Interface config commands
12
417