Brocade Communications Systems RFS4000 Cli Reference Manual page 656

20
Wireless configuration commands
tunnel tx-rate-class
<1-4>
wmm [background|
best-effort|video|voice]
[aifsn<1-15>|burst
<0-65535>| cw<0-15>]
wmm [video|voice]
acm [enable|max-clients
<1-64>]
Example
654
The tunnel transmit rate class for the radio. Select a value from 1
to 4.
Sets 802.11e/Wireless Multi Media (WMM) parameters
(supported only on BR300).
•
•
•
•
•
•
•
•
RFController(config-wireless)#radio 250 bss auto 3-5
RFController(config-wireless)#
RFController(config-wireless)#radio 1 amsdu tx-enable rx-limit 3839
RFController(config-wireless)#RFController
background – Prioritizes Background category traffic.
best-effort– Prioritizes Best Effort category traffic.
video – Prioritizes Video category traffic.
voice – Prioritizes Voice category traffic.
acm [enable|max-clients <1-64>] – Admission control
parameters. Use to allow admission
enable
control.Enabling ACM on video enables ACM on the Voice
access category. Use
max-clients
of wireless clients that are allowed access on the specified
categories.
aifsn <1-15> – Arbitration Inter Frame Spacing Number
(AIFSN) defines the wait time (in milliSeconds) between data
frames. Derived using AIFSN and the slot-time.
burst <0-65535> – Transmit-opportunity. Sets an interval
when a particular WMM STA has the right to initiate
transmissions onto the wireless medium.
cw <0-15> – Contention Window (cw) parameters. Wireless
stations pick a number between 0 and the minimum
contention window to wait before re-trying transmissions.
Stations then double their wait time on a collision, until it
reaches the maximum contention window.
Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
to specify the number
53-1001931-01