Role - Brocade Communications Systems RFS4000 Cli Reference Manual

5
Global Configuration commands

role

Global Configuration commands
Configures role parameters
NOTE
Opens the role configuration mode
Avance Security Licence must be installed for Role Based Firewall to work. Please contact customer
support to purchase license for the same.
Supported in the following platforms:
•
•
•
Syntax
Parameters
role <rolename>
<priority>
role assignment
immediate enable
Usage Guidelines
To remove a role, use the command
Example
278
Mobility RFS4000 Controller
Mobility RFS6000 Controller
Mobility RFS7000 Controller
role [<rolename>|assignment]
role <rolename> <priority>
role assignment immediate enable
Creates a new role with the name <rolename> and with the priority
<priority> (range 1-10001). This moves to the role instance. For more
information see
Enables immediate role assignment and triggers role evaluation. This
is required when a new role is added or a role is modified.
{no} role <rolename> <priority>
RFController(config)# role AccMgr 10
RFController(config-role)# ?
RFController(config)#role assignment immediate enable
RFController(config)#show role
role officeuser 10
authentication-type any
encryption-type any
ap-location exact "office"
essid office
client-mac any
group any
role globaluser 11
authentication-type any
to enable further configuration of the role. For
(config-role)
Chapter 26, Role Instance.
Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
53-1001931-01