Adapter - Brocade Communications Systems RFS4000 Cli Reference Manual

22
ESPI config commands

adapter

ESPI config commands
Enables/disables a specified adapter or all adapters
Supported in the following platforms:
•
•
•
Syntax
Parameters
adapter ale-tcp [enable|port
<3000-3100>]
Usage Guidelines
Use
NOTE
ALE-TCP is the only adapter shipped along with the controller.
Example
730
Mobility RFS4000 Controller
Mobility RFS6000 Controller
Mobility RFS7000 Controller
adapter ale-tcp [enable|port <3000-3100>]
Application side protocol implemented by adapter.
•
{no} adapter <adapter> enable
RFController(config-rtls-espi)#adapter ale-tcp port 3040
RFController(config-rtls-espi)#
ale-tcp – ALE over TCP Adapter
•
enable – Activates/enables ESPI adapter
•
port <3000-3100> – Configures ESPI adapter listening
port
to disable the specified adapter
Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
53-1001931-01