Brocade Communications Systems RFS4000 Cli Reference Manual page 414

12
Interface config commands
ip
Interface config commands
Sets the IP address for the assigned Fast Ethernet interface (ME) and VLAN Interface
Supported in the following platforms:
•
•
•
Syntax
412
Mobility RFS4000 Controller
Mobility RFS6000 Controller
Mobility RFS7000 Controller
ip [access-group|address|arp|dhcp|helper-address|nat]
ip access-group [<1-99>|<100-199>|<1300-1999>|
<2000-2699>|WORD in]
ip arp [rate-limit|trust]
ip dhcp trust
ip address [<IP/Mask> {secondary}|dhcp]
ip helper-address <IP>
ip nat [inside|outside]
Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
53-1001931-01