13
mst config commands
instance
mst config commands
Associates VLAN(s) with an instance
Supported in the following platforms:
•
•
•
Syntax
Parameters
<1-15>
vlan <vlan-id>
Usage Guidelines
MSTP works based on instances. An instance is a group of VLANs with a common spanning tree. A
single VLAN cannot be associated with multiple instances.
Controllers with the same instance, VLAN mapping, revision number and region names define a
unique region. Controllers in the same region exchange bridge protocol data units (BPDUs) with
instance record information within it.
Example
The following example sets an instance named 10 and maps VLAN 20 to it:
440
Mobility RFS4000 Controller
Mobility RFS6000 Controller
Mobility RFS7000 Controller
instance <1-15> vlan <vlan-id>
Defines the instance ID to which the VLAN is associated
Sets the VLAN ID for its association with an instance
RFController(config-mst)#instance 10 vlan 20
RFController(config-mst)#
Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
53-1001931-01