Brocade Communications Systems RFS4000 Cli Reference Manual page 38

2
Common commands
36
ip Internet Protocol (IP)
line Configure a terminal line
local Local user authentication database for VPN
logging Modify message logging facilities
mac MAC configuration
mac-address-table Configure MAC address table
mac-name Remove a configured MAC Address name
management sets properties of the management interface
network-element-id Reset system's network element
ntp Configure NTP
prompt Reset system's prompt
radius-server RADIUS server configuration commands
ratelimit ratelimit
role Configure role parameters
redundancy Configure redundancy group parameters
service Service Commands
smtp-notification Modify SMTP-Notification parameters
snmp-server Modify SNMP engine parameters
spanning-tree Spanning tree
timezone Revert the timezone to default (UTC)
traffic-shape Traffic shaping
username Establish User Name Authentication
vpn vpn
virtual-ip Virtual IP
wlan-acl Remove an ACL from WLAN
white-list Host whitelist
wlan-acl Remove an ACL from WLAN
wwan Wireless WAN interface
RFController(config)#no
Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
53-1001931-01