Brocade Communications Systems RFS4000 Cli Reference Manual page 382

10
Crypto Map config commands
set
Crypto Map config commands
Configures set parameters for the peer device
Supported in the following platforms:
•
•
•
Syntax
380
Mobility RFS4000 Controller
Mobility RFS6000 Controller
Mobility RFS7000 Controller
set [localid|mode|peer|pfs|remote-type {ipsec-l2tp|xauth}|
security-association|session-key|transform-set)
set localid [dn|hostname]<name>
set pfs [1|2|5]
set mode [aggressive|main]
set security-association [level|lifetime]
set security-association level perhost
set security-association lifetime [kilobytes|seconds]<value>
set session-key [inbound|outbound]{ah|esp}
set session-key [inbound|outbound] ah <hexkey data>
set session-key [inbound|outbound] esp <SPI>cipher<hexdata key> authenticator
<hexkey data>
set peer [ipaddress|<host name>]
set remote-type [ipsec-l2tp|xauth]
set transform-set <name>
Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
53-1001931-01