Extended Acl Instance; In This Chapter; Extended Acl Config Commands - Brocade Communications Systems RFS4000 Cli Reference Manual

Extended ACL Instance

In this chapter

The Extended ACL instance
List entries associated with the controller.
To navigate to this instance, use the command

Extended ACL config commands

Table 14
TABLE 14
Command
clrscr
deny
exit
help
mark
no
permit
service
show
Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
53-1001931-01
•
Extended ACL config commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 449
•
Configuring IP Extended ACL. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 469
(config-ext-nacl)
RFController(config)#ip access-list extended [<ACL-name>|
<100-199>|<2000-2699>]
RFController(config-ext-nacl)#
summarizes
config-ext-nacl
Extended ACL Config Command Summary
Description
Clears the display screen
Specifies packets to reject
Ends the current mode and moves to the previous mode
Displays the interactive help system
Specifies packets to mark
Negates a command or sets its defaults
Specifies packets to forward
Invokes the service commands to troubleshoot or debug
(config-if)
Displays running system information
is used to manage the extended Access Control
commands:
instance configurations
Chapter
14
Ref.
page 450
page 451
page 456
page 457
page 458
page 462
page 463
page 467
page 468
449