Brocade Communications Systems RFS4000 Cli Reference Manual page 291

password 0 <password>
port <1-65535>
prefix <smtp-prefix>
recipient <1-4>
<recipient-address>
sender <sender-address>
smtp-server-address <IP>
user <username>
Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
53-1001931-01
•
associated – Wireless station associated
•
deniedAssociationAsPortCapacity
Reached – Wireless station denied association
due to port capacity reached
•
deniedAssociationOnCapability – Wireless station
denied association due to unsupported capability
•
deniedAssociationOnErr – Wireless station denied
association due to internal error
•
deniedAssociationOnInvalidWPAWPA2IE –
Wireless station denied association due to
invalid/absent WPA/WPA2 IE
•
deniedAssociationOnRates – Wireless station
denied association due to incompatible
Transmission rates
•
deniedAssociationOnSSID – Wireless station
denied association due to invalid SSID
•
deniedAssociationOnShortPream – Wireless
station denied association due to lack of short
preamble support
•
deniedAssociationOnSpectrum – Wireless station
denied association due to lack of spectrum
management capability
•
deniedAuthentication – Wireless station denied
802.11 authentication
•
disassociated – Wireless station disassociated
•
radiusAuthFailed – Wireless station failed radius
authentication
•
tkipCounterMeasures – TKIP counter measures
invoked
•
vlanChanged – Wireless station vlan id changed
•
wlan [vlanUserLimitReached|webPortalUnavailable|
webPortalUnconnected||webPortalUnreachable] –
Enables wireless wlan traps when:
•
vlanUserLimitReached – WLAN-VLAN user limit is
reached
•
webPortalUnavailable – Web portal unavailable
•
webPortalUnconnected – Web portal disconnected
•
webPortalUnreachable – Web portal unreachable
SMTP Authentication Password.
•
0 – Password is specified unencrypted
•
<password> – Enter password up to 64 characters in length
Enter SMTP Server TCP Port.
Enter SMTP subject prefix up to 16 characters in length.
Enter SMTP recipient index and SMTP recipient address up to 128
characters in length.
Enter SMTP sender address up to 128 characters in length.
Host to receive SMTP notifications. Enter IP address/Hostname of
SNMP server up to 128 characters in length.
SMTP Authentication User. Enter username up to 64 characters in
length.
Global Configuration commands
5
289