Multicast-Packet-Limit - Brocade Communications Systems RFS4000 Cli Reference Manual

multicast-packet-limit

Wireless configuration commands
Sets a multicast packet limit, per second, for a VLAN. This limits the broadcast/multicast packets
per VLAN. The default value is 32 broadcast/multicast packets per second. Setting the limit to 0
disables this control.
Supported in the following platforms:
•
•
•
Syntax
Parameters
<0-128>
<vlan-id>
<vlan-id-range>
Example
Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
53-1001931-01
Mobility RFS4000 Controller
Mobility RFS6000 Controller
Mobility RFS7000 Controller
multicast-packet-limit <0-128> [<vlan-id>|<vlan-id-range>]
Sets the multicast packet limit per second.
Defines the single VLAN ID in the range 1-4094 the new limit
applies to.
Defines a list of VLAN IDs in the format 1,3,7 or range 3-7 of VLAN
IDs
RFController(config-wireless)#multicast-packet-limit 120 50
RFController(config-wireless)#
RFController(config-wireless)#multicast-packet-limit 120 1,10,25
RFController(config-wireless)#
Wireless configuration commands
20
637