Wireless - Brocade Communications Systems RFS4000 Cli Reference Manual

wireless

Global Configuration commands
Configures controller wireless parameters
This command moves you to the
20, Wireless
Supported in the following platforms:
•
•
•
Syntax
Parameters
None
Usage Guidelines
The wireless command is used to enter the config-wireless instance wherein you can configure
wireless parameters. Confirm you have entered the wireless instance, as the prompt changes from
the regular
Example
Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
53-1001931-01
Instance.
Mobility RFS4000 Controller
Mobility RFS6000 Controller
Mobility RFS7000 Controller
wireless
RFController(config)#
RFController(config)#wireless
RFController(config-wireless)#
Global Configuration commands
instance. For more information, see
config-wireless
to
RFController(config-wireless)#.
5
Chapter
311