Show - Brocade Communications Systems RFS4000 Cli Reference Manual

25
smart-rf config commands

show

smart-rf config commands
Displays current system information
Supported in the following platforms:
•
•
•
NOTE
The following commands display only for the Mobility RFS6000 Controller and the Mobility RFS4000
Controller
- power
The following commands display only for the Mobility RFS7000 Controller and the Mobility RFS4000
Controller:
- port-channel
- static-channel-group
Syntax
Parameters
?
Example
794
Mobility RFS4000 Controller
Mobility RFS6000 Controller
Mobility RFS7000 Controller
show <parameters>
show wireless smart-rf [calibration-status|configuration| history |radio]
show wireless smart-rf calibration-status
show wireless smart-rf configuration
show wireless smart-rf history
show wireless smart-rf radio [config|local-status|map|
master-status|neighbors|spectrum]
show wireless smart-rf radio config[<1-4096>|MAC_ADDRESS
|all-11a|all-11bg]
show wireless smart-rf radio local-status[<1-4096>|
MAC_ADDRESS|all-11a|all-11bg]
show wireless smart-rf radio map [MAC_ADDRESS|all-11a|
all-11bg]
show wireless smart-rf radio master-status [MAC_ADDRESS|
all-11a|all-11bg]
show wireless smart-rf radio neighbors [MAC_ADDRESS|
all-11a|all-11bg]
show wireless smart-rf radio spectrum [MAC_ADDRESS|
all-11a|all-11bg]
Displays the parameters for which information can be viewed
using the show command
RFController(config-wireless-smart-rf)#show ?
access-list
aclstats
alarm-log
Internet Protocol (IP)
Show ACL Statistics information
Display all alarms currently in the system
Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
53-1001931-01