Service - Brocade Communications Systems RFS4000 Cli Reference Manual

service

Trustpoint (PKI) config commands
Invokes service commands to troubleshoot or debug the
configuration
Supported in the following platforms:
•
•
•
Syntax
Parameters
None
Example
Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
53-1001931-01
Mobility RFS4000 Controller
Mobility RFS6000 Controller
Mobility RFS7000 Controller
service show cli
RFController(config-trustpoint)#service show cli
Trustpoint Config mode:
+-clrscr [clrscr]
+-company-name
+-WORD [company-name WORD]
+-do
+-LINE [do LINE]
+-email
+-WORD [email WORD]
+-end [end]
+-exit [exit]
+-fqdn
+-WORD [fqdn WORD]
+-help [help]
+-ip-address
+-A.B.C.D [ip-address A.B.C.D]
+-no
+-company-name [no company-name]
+-email [no email]
+-fqdn [no fqdn]
+-ip-address [no ip-address]
+-subject-name [no subject-name]
.............................................................................
.............................................................................
..........................
RFController(config-trustpoint)#
Trustpoint (PKI) config commands
crypto pki trustpoint
11
instance
399