broadcast-tx-speed
Wireless configuration commands
Configure the rate at which broadcast and multicast traffic is transmitted between the controller
and wireless client
Supported in the following platforms:
•
•
•
Syntax
Parameters
range
throughput
Example
Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
53-1001931-01
Mobility RFS4000 Controller
Mobility RFS6000 Controller
Mobility RFS7000 Controller
broadcast-tx-speed [range|throughput]
Uses a lowest basic rate, but provides the maximum range
(default)
Uses a highest basic rate, but provides the maximum throughput
RFController(config-wireless)#broadcast-tx-speed range
RFController(config-wireless)#
RFController(config-wireless)#broadcast-tx-speed throughput
RFController(config-wireless)#
Wireless configuration commands
20
611