permit
Extended ACL config commands
Permits specific packets.
NOTE
ACLs do not allow DHCP messages to flow by default. Configure an Access Control Entry (ACE) to
allow DHCP messages to flow through.
RFController(config-ext-nacl)#permit ip xxx.xxx.xxx.xxx/x 192.168.2.0/24
RFController(config-ext-nacl)#permit ip any host xxx.xxx.xxx.xxx
RFController(config-ext-nacl)#
Supported in the following platforms:
•
•
•
Syntax
Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
53-1001931-01
Mobility RFS4000 Controller
Mobility RFS6000 Controller
Mobility RFS7000 Controller
permit[icmp|ip|tcp|upd|proto]
permit icmp [<source-IP/Mask>|any|host <ip>] [<dest-IP/Mask>|any|host <IP>]
{<ICMP-type> {<ICMP-code>}} {log} {rule-precedence <1-5000>]}
permit ip [<source-IP/Mask>|any|host <IP>] [<dest-IP/mask>|any|host <IP>]
{log} {rule-precedence <1-5000>}
permit [tcp|udp] [<source-ip/mask>|any|host <IP>] {eq <source-port>|range
<starting-source-port> <ending-source-port>} [<dest-IP/Mask|any|host <IP>] {eq
<source-port>} {range <starting-source-port> <ending-source-port>} {log}
{rule-precedence <1-5000>}
permit proto [<1-254>|WORD|eigrp|gre|igmp|igp|ospf|vrrp]
[<source-IP/Mask>|any|host <IP>][<dest-IP/Mask>|any|host <IP>]
{log} {rule-description<WORD>|rule-precedence<1-5000>}
Extended ACL config commands
14
463