Service - Brocade Communications Systems RFS4000 Cli Reference Manual

22
ESPI config commands

service

ESPI config commands
Invokes service commands to troubleshoot or debug
Supported in the following platforms:
•
•
•
Syntax
Parameters
None
Example
736
Mobility RFS4000 Controller
Mobility RFS6000 Controller
Mobility RFS7000 Controller
service show cli
RFController(config-rtls-espi)#service show cli
ESPI Config mode:
+-adapter
+-ADAPTER
+-activate [adapter ADAPTER activate]
+-port
+-<3000-3100> [adapter ADAPTER port <3000-3100>]
+-clrscr [clrscr]
+-do
+-LINE [do LINE]
+-end [end]
+-exit [exit]
+-help [help]
+-no
+-adapter
+-ADAPTER
+-activate [no adapter ADAPTER activate]
+-quit [quit]
.............................................................................
.............................................................................
.............................................................................
.............................................................................
.............................................................................
.................
RFController(config-rtls-espi)#
(config-if)
Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
instance configurations
53-1001931-01