Ping - Brocade Communications Systems RFS4000 Cli Reference Manual

3
User exec commands

ping

User exec commands
Sends ICMP echo messages to a user-specified location
Supported in the following platforms:
•
•
•
Syntax
Parameters
ping {[<IP>|<hostname>]}
Example
164
Mobility RFS4000 Controller
Mobility RFS6000 Controller
Mobility RFS7000 Controller
ping {[<IP>|<hostname>]}
Pings the specified destination IP address or hostname. When
entered without any parameters, this command prompts you for
an IP/Host-name to ping.
RFController>ping 192.168.2.100
PING 192.168.2.100 (192.168.2.100): 100 data bytes
128 bytes from 192.168.2.100: icmp_seq=0 ttl=128 time=2.7 ms
128 bytes from 192.168.2.100: icmp_seq=1 ttl=128 time=38.4 ms
128 bytes from 192.168.2.100: icmp_seq=2 ttl=128 time=4.6 ms
--- 192.168.2.100 ping statistics ---
3 packets transmitted, 3 packets received, 0% packet loss
round-trip min/avg/max = 2.7/15.2/38.4 ms
RFController>ping
Target IP address:
Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
53-1001931-01