15
Standard ACL config commands
no
Standard ACL config commands
Negates a command or sets its defaults
Supported in the following platforms:
•
•
•
Syntax
Negates all the syntax combinations used in deny, mark and permit designations.
Parameters
deny
mark
permit
Example
480
Mobility RFS4000 Controller
Mobility RFS6000 Controller
Mobility RFS7000 Controller
no [deny|mark|permit]
Specifies packets to reject
Specifies packets to mark
Specifies packets to forward
RFController(config-std-nacl)#no permit any rule-precedence 10
RFController(config-std-nacl)#
RFController(config-std-nacl)#no deny any rule-precedence 20
RFController(config-std-nacl)#
RFController(config-std-nacl)#no mark tos 4 192.168.2.0/24 rule-precedence 30
RFController(config-std-nacl)#
Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
53-1001931-01