Brocade Communications Systems RFS4000 Cli Reference Manual page 265

Parameters
aggregation-time <1-60>
buffered [<0-7>|alerts|
critical|debugging|
emergencies|errors|
informational|
notifications|warnings]
console [<0-7>|alerts|
critical|debugging|
emergencies|errors|
informational|
notifications|warnings]
facility [local0|local1|
local2|local3|local4|
local5|local6|local7]
host <IP>
monitor [<0-7>|alerts|
critical|debugging|
emergencies|errors|
informational|
notifications|warnings]
on
syslog [<0-7>|alerts|
critical|debugging|
emergencies|errors|
informational|
notifications|warnings]
Example
Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
53-1001931-01
Sets the number of seconds for aggregating repeated messages.
The value can be configured between 1-60 seconds.
Sets the buffered logging level
•
•
•
•
•
•
•
•
•
Sets the console logging level.
Syslog facility in which log messages are sent.
•
•
•
•
•
•
•
•
Configures a remote host to receive log messages.
•
Sets the terminal lines logging level.
Enables the logging of system messages.
Sets the syslog servers logging level.
RFController(config)#logging on
RFController(config)#logging aggregation-time 20
RFController(config)#logging buffered critical
RFController(config)#logging console critical
RFController(config)#logging facility local6
RFController(config)#logging monitor emergencies
RFController(config)#logging syslog notifications
RFController(config)#show logging
Logging module: enabled
Global Configuration commands
<0-7> – Enter the logging severity level (0-7)
alerts – Immediate action needed, (severity=1)
critical – Critical conditions, (severity=2)
debugging – Debugging messages, (severity=7)
emergencies – System is unusable, (severity=0)
errors – Error conditions, (severity=3)
informational – Informational messages, (severity=6)
notifications – Normal but significant conditions, (severity=5)
warnings – Warning conditions, (severity=4)
local0 – Syslog facility local0
local1 – Syslog facility local1
local2 – Syslog facility local2
local3 – Syslog facility local3
local4 – Syslog facility local4
local5 – Syslog facility local5
local6 – Syslog facility local6
local7 – Syslog facility local7
<IP>– Remote host's IP address.
5
263