19
Radius configuration commands
end
group
Ends and exits the current mode and changes to the PRIV EXEC mode. The prompt changes to
RFController#
Syntax
Parameters
None
Example
exit
group
Ends the current mode and moves to the previous mode
to
RFController(config)#
Syntax
Parameters
None
Example
group
group
Establishes RADIUS user group parameters. This command creates a group within the existing
RADIUS group
Syntax
Parameters
<group-name>
Example
564
end
RFController(config-radsrv-group)#end
RFController#
.
exit
RFController(config-radsrv-group)#exit
RFController(config-radsrv)#group
group <group-name>
Defines the RADIUS group name
RFController(config-radsrv-group)#group TestGroup
RFController(config-radsrv-group)#
(config-radsrv)
Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
). The prompt changes
53-1001931-01