8
Crypto Peer config commands
set
Crypto Peer config commands
Configures the aggressive-mode of config-crypto-peer
Supported in the following platforms:
•
•
•
Syntax
Parameters
aggressive-mode password
[0 <password>|2
<password>|<password>
Example
358
Mobility RFS4000 Controller
Mobility RFS6000 Controller
Mobility RFS7000 Controller
set aggressive-mode password [0 <password>|2 <password>|
<password>]
Defines aggressive mode attributes
•
RFController(config-crypto-peer)#set aggressive-mode password CheckMeIn
RFController(config-crypto-peer)#
password – Specifies a tunnel-password attribute
•
0 <password> – Password <password> is specified
unencrypted.
•
2 <password> – Password <password> is specified
encrypted with the password-encryption secret
•
<password> – The password of minimum size of 8
characters.
Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
53-1001931-01