DHCP Class Instance
In this chapter
Use the (config-dhcpclass) instance to configure DHCP user classes. The controller supports a
maximum of 8 user classes per DHCP class. To navigate to this instance use the command:
Refer to
configurations.
DHCP Server Class config commands
Table 19
TABLE 19
Command
clrscr
end
exit
help
multiple-user-class
no
option
service
show
Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
53-1001931-01
•
DHCP Server Class config commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 543
RFController(config)#ip dhcp class <class-name>
RFController(config-dhcpclass)#
ip on page 412
and
DHCP Config commands on page 507
summarizes
config-std-nacl
DHCP Server Class Config Commands
Description
Clears the display screen
Ends the current mode and moves to the EXEC mode
Ends the current mode and moves to the previous mode
Displays the interactive help system in HTML format
Enables multiple user class options
Negates a command or sets its defaults
Defines DHCP Server options
Invokes service commands to troubleshoot or debug
(config-if)
Displays running system information
commands:
instance configurations
Chapter
18
for other DHCP related
Ref.
page 544
page 545
page 546
page 547
page 548
page 549
page 550
page 551
page 552
543